FOCUS SOLAR SOLAR INSTALLATION INSTRUCTIONS

Table of contents

• Solar lights
• Instructions for using the remote control solar lights
• Motion sensor
• Installation instructions

Solar lights

Instructions for using the remote control solar lights

Before using the remote control, press the [ON] button to turn on the light

1. HL+SEN: Press the sensor button, the light will be on when motion is detected, then the light will automatically dimmer 10%.
2. 2H+SEN: Light continuously for 2 hours, then switch to sensor mode
3. 4H+SEN: Light continuously for 4 hours, then switch to sensor mode
4. Morning 100% for the first 1 hour + 3 hours after morning 70% + then 30% until morning

Motion sensor

When someone comes, the lights will on one's own dynamic get a raise degree shining, after people go, lamp on one's own dynamic reduce degree shining to save energy

Morning 10%	Morning 100%	Morning 10%
Not coming	Into the	Left

Installation instructions

Tips:

1. Should be installed plate the battery direction toward BILLIONHey WOMENam, forming the best mounting angle with the horizontal plane.
2. Depending on the latitude of different regions, panels can be installed lean one corner are from 15 come 45 degree.
3. Make sure the solar panel is installed in a sunny area, and Avoid the parking spot of buildings, trees, etc. to ensure the longest charging time.

For large-capacity lamps of 200W or more, on a rainy or shady day, the brightness should be reduced to 50% to save energy.